Chemical-Resistant Gloves: Nitrile vs Neoprene vs PVC vs Rubber

Disposable exam gloves are fine for a quick wipe-down, but they are thin and are not meant for soaking hands in cleaners, degreasers or sanitizers all shift. For that you need a reusable chemical-resistant glove. This guide explains the four main materials, how to choose thickness and length, and how to check that a glove suits the chemical you actually use.
Start with the safety data sheet
Every chemical product used at work comes with a safety data sheet (SDS). Section 8 lists the protective equipment needed, and often names a glove material, such as “nitrile” or “neoprene”. Use that as your starting point. No glove material resists every chemical, so a glove that works well with one product can break down quickly with another.
The four main materials
| Material | Generally good for | Watch out for | Examples |
|---|---|---|---|
| Nitrile | Oils, greases, many cleaners and detergents | Some strong solvents | Blue-Touch Nitrile Reusable Gloves, Green-Touch Nitrile Reusable Gloves 22Mil 18", Atlas Nitrile Coated Chemical Resistant Gloves |
| Neoprene | A broad range of acids, caustics and sanitizers; stays flexible | Higher cost per pair | Showa Neoprene Gloves, Smooth Finish, 12", Black, Showa Neoprene Gloves, Smooth Finish, 14", Black, Showa Neoprene Gloves, Smooth Finish, 16", Black |
| PVC | Water-based chemicals, acids and caustics, wet and greasy work | Many solvents; stiffens in deep cold | Showa PVC Gloves, with Seamless Liner, 13.5", orange, rough, Integra Triple Dipped PVC Gloves |
| Natural rubber (latex) | Water-based solutions, food processing and sanitation; very flexible | Oils and fats; latex allergies | Canners Natural Rubber Gloves |
The table is a rough guide only. Always confirm against the SDS, and test a pair on the real job before ordering in bulk.
Thickness: comfort vs protection
Reusable glove thickness is measured in mil (thousandths of an inch). Thicker gloves last longer and resist chemicals longer, but they cost you some feel.
- About 9 mil: light cleaning and dishwashing where you still need to feel what you are doing. Example: Blue-Touch Nitrile Reusable Gloves.
- About 15 mil: a good everyday middle ground. A flock lining makes long shifts more comfortable, as with Green-Touch+ Nitrile Reusable Flock Lined Gloves 15mil.
- 22 mil and up: heavy chemical work and degreasing, such as Green-Touch Nitrile Reusable Gloves 22Mil 18".
Length: keep splashes off your wrists
A glove only protects what it covers. If liquid can run over the cuff, it ends up trapped against your skin, which is worse than no glove at all.
- 12 to 13.5 inches: bench work and spraying, for example Showa Neoprene Gloves, Smooth Finish, 12", Black or Showa PVC Gloves, with Seamless Liner, 13.5", orange, rough.
- 14 to 18 inches: sinks, tubs and dipping parts, for example Showa Neoprene Gloves, Smooth Finish, 16", Black or Green-Touch Nitrile Reusable Gloves 22Mil 18".
- Up to 28 inches: reaching into deep tanks, for example Integra Triple Dipped PVC Gloves.
For work at or below waist height, fold the cuff back about an inch to make a drip catcher. When reaching up, tuck sleeves into the glove instead.
Smooth or rough finish?
A smooth finish rinses clean easily and suits food and sanitation work. A rough or textured finish grips wet and oily parts much better. Pick rough if workers handle slippery tools, bottles or parts.
Lined or unlined?
Unlined gloves give the best feel and dry fastest. Flock-lined gloves are easier to pull on and absorb sweat. Foam-insulated gloves, such as Showa Neoprene Gloves, Rough Finish, Foam Insulated, 12", Black, add warmth for cold water and cold rooms. If you need cut protection as well, look at a coated cut-resistant glove like Showa Nitrile Fully Coated Cut-Resistance A4 Gloves, Foam Palm. Our cut levels guide explains the ratings.
Care and replacement
- Rinse the outside of the gloves before you take them off.
- Hang them upside down to dry, away from heat.
- Check for cracks, swelling, stickiness or colour change before each use. Any of these means the glove is finished.
- Give each worker their own gloves. Never share chemical gloves.
- Keep a spare pair at each station so nobody works bare-handed while a glove dries.
Frequently asked questions
Can I use disposable nitrile gloves for chemicals?
For brief contact with mild cleaners, sometimes. Thin disposables are meant for splash protection only. Change them as soon as they are splashed, and use a reusable glove for soaking or long contact. See our nitrile exam gloves guide.
Which glove is best for kitchen sanitizers?
Check the sanitizer’s SDS. Nitrile and neoprene are common choices for quaternary and chlorine-based sanitizers at normal working strength.
How long does a reusable glove last?
It depends on the chemical, how strong it is, and how long the glove is in contact with it. Set a regular replacement schedule, and replace gloves straight away if they show any damage.