Safety Glasses vs Face Shields: Choosing Eye and Face Protection

Eye injuries happen in a split second: a chip of metal, a splash of cleaner, a spray of hot oil. Safety glasses and face shields both help, but they do different jobs. This guide explains which to use, and when to wear both together.
What each one protects
| Safety glasses | Face shield | |
|---|---|---|
| Protects | The eyes, from the front and sides | The whole face, from the front |
| Best against | Flying particles, dust and debris | Splashes, sprays and spatter |
| Weak spot | Leaves the rest of the face exposed | Open at the bottom and sides; not a primary eye protector against impact |
| Example | Ronco Black Frame With Clear Lens Adjustable Safety Glasses | Elastic Face Shields Anti-Fog Full Length, Flip up Face shields |
The key point: a face shield is generally treated as a secondary protector. For impact hazards, wear safety glasses under the shield.
Safety glasses
Look for glasses marked to CSA Z94.3, the Canadian standard for eye and face protectors. Ronco Black Frame With Clear Lens Adjustable Safety Glasses meets CSA Z94.3-07, with a clear lens, side shields and adjustable arms for a better fit. Good glasses should:
- Sit close to the face without touching the eyelashes.
- Have side protection.
- Stay put when you look down or bend over.
A Dynamic™ Spectacles Cord Holder, Size OS, Black keeps glasses hanging around the neck when they are off, so they are less likely to be dropped, scratched or left behind.
Face shields: three styles
Elastic band shields
Elastic Face Shields Anti-Fog Full Length is a 9-inch anti-fog shield on an elastic band. It is light and simple, and a good fit for clinics, dental offices and lab work where splashes are the main concern. Each one is individually packed.
Flip-up shields
Flip up Face shields flips up when you need a clear view or want to talk, and flips down for the task. The visor can be replaced, so the headgear lasts longer. This suits kitchens, cleaning crews and workshops where the shield goes on and off all day.
Glasses-style shields
Glasses Face Shield mounts on a glasses-style frame with no headband. It is very light and does not mess up hair or press on a hair cover, which makes it popular for short tasks and reception or screening desks.
Which tasks need what?
- Grinding, cutting, drilling: safety glasses at a minimum. Add a face shield for heavy grinding.
- Mixing or pouring chemicals: a face shield over safety glasses, and chemical-resistant gloves (see our chemical gloves guide).
- Dental and clinical procedures: a face shield or protective eyewear with a mask. See our dental and clinic checklist.
- Hot oil and fryers: a face shield helps protect against spatter during filtering and cleaning.
- General site work: safety glasses. See our site safety basics.
Stopping fogging
- Choose anti-fog shields where possible.
- Make sure a mask fits snugly over the nose, so warm breath does not go up into the lens.
- Let eyewear warm up to room temperature before you leave a cold room.
- Never wipe a lens dry. Rinse it, then blot it with a soft cloth.
Cleaning and replacement
Clean eyewear with mild soap and water, rinse, and dry with a soft cloth such as a Microfiber Cloth 16"x16". Avoid paper towels, which scratch. Replace glasses or visors that are scratched, cracked or warped, because scratches scatter light and cause eye strain.
Frequently asked questions
Can I wear a face shield instead of safety glasses?
Not where there is an impact hazard. A face shield protects against splashes but is open at the bottom and sides. Wear safety glasses underneath.
Can I wear safety glasses over prescription glasses?
Regular safety glasses are not designed to fit over prescription frames. Ask about over-the-glasses styles or prescription safety eyewear. A face shield can be worn over regular glasses for splash protection.
Are face shields reusable?
Many are. Clean and disinfect them between uses according to your workplace procedure, and replace the visor when it becomes scratched or cloudy.